Archive

Posts Tagged ‘Right’

Treat Your Airsoft Rifle Right

January 27th, 2012


While gear tends to be durable, I have come across a few prematurely broken electric sniper rifles in my time. More often than not, these rifles were victim to user misuse and abuse. I strongly believe that you should enjoy your gear to the fullest, but it’s also important to take care of your investment so that it will last for the long-haul. Here are a few tips to help you do just that:

Only use quality BBs. If you take only one concept away from this list, let it be this: avoid cheap BBs at all cost! Low grade BBs are found in sporting goods stores and Wal-Mart. They are sometimes labeled as “Seamless 0.20g” or “Seamless 0.12g” BBs but don’t let the name fool you, these are sub-par BBs and need to be avoided. These cheap BBs break apart too easily, which leads to jams, stripped pistons, and chipped gears. Furthermore, if you use cheap BBs you will void your warranty. High quality BBs are sold exclusively at specialty retailers and will minimize jamming, improve FPS, and improve firing accuracy. Beware low battery power. When your battery is low, it’s easier for the gearbox to “lock up” which can lead to damaged internal components. To avoid this, keep your firearm appropriately charged and stop using the when battery life is low. But also beware of over-changing. On the flip side, it is not wise to leave your battery charging overnight with a standard wall charger. This practice can lead to damaged battery cells. Charge for fixed periods of time using a hi-output “smart” charger, which will taper off the current when the battery is full. Be careful with upgrades. Upgrades should only be made by experts. Keep in mind that raising battery voltage will put more stress on your firearm as it increases will your Rate of Fire (ROF) as opposed to Feet per Second (FPS) or velocity. If you want to increase your FPS it makes more sense to upgrade your spring, but again, this will add more stress to the internals that have not been upgraded in proportion to the spring. In short, it’s best to consult with an expert when considering upgrades to your . Care for your gun. You should always perform general maintenance before and after serious game play. The general maintenance should include unjamming and clearing the barrel of debris, as well as lubing the internal barrel, the hop up and magazine. Expert internal maintenance should be done every 4 to 6 months.

Mike Zhang is the VP of Operations of Megastore, a leading online provider of guns, gear and accessories. Megastore offers guaranteed lowest prices on guns including electric airsoft guns and airsoft sniper rifles.


Article from articlesbase.com

Air Soft , , ,

Getting the Right BBs for Your Airsoft Gun

October 12th, 2011


If you thought that 6mm BBs were all there is in , you are wrong. Based on your level of sophistication, you may possibly need .20 BBs, or perhaps you may even want to use 6mm paintballs. That is right, making use of 6mm paintballs as an alternative of typical ammunition can truly boost your next military or police simulation. Think about it, you get the splat of the paintball arena, combined with the accuracy and authentication of . It really is type of like the perfect mixture.


Be cautious with the Lower End Weapons


Spring action pistols and rifles can present a problem when it comes to achieving the higher levels of play, and using the increased good quality BBs. Spring action pistols and rifles tend to have less power than their electric and gas counterparts, and therefore may have difficulty handling the heavier BBs. Generally, the spring guns are created for .12 common 6mm BBs, generally the cheapest of the obtainable ammo, and often acknowledged by basically “ BBs” or “seamless BBs”. Don’t get me incorrect, there is practically nothing incorrect with the good quality of these BBs, nonetheless for extended range fire and accuracy, they simply do not compete with the heavier, higher good quality BBs.


For Electric and Gas Power Players


For the severe enthusiast, they need to be searching at guns that can quickly handle .20 and higher BBs. A gun that fires at 300 feet per second or increased is a very good choice, and will let you to hit targets with accuracy at 50 feet and greater. If you actually want to pack the punch, try a .23 or .25 BB. Of course, these BBs are not going to have the range of .20 BB, but they will be correct, and sting more than the lighter BBs. Where price tag is a aspect, the .20 BB is undoubtedly less costly and a lot more widely distributed than .23 or .25 BBs.


Don’t Reuse Your Ammo


Particularly for the greater end guns, reusing ammo just doesn’t make sense. Picture what the influence does to a BB at 300+ feet per second. Deformities, dirt, etc. can really hurt the lifespan of your high dollar pistol or . So just bite the bullet when comes to BBs, don’t pinch the pennies, simply because you may possibly regret it later. Even with the less expensive spring powered guns, it is greater to just use new BBs, unless you are already organizing to replace the gun.


So we have witnessed how finding the proper BBs, and usually using new ammo in your guns is the right way to go for extended term enjoyment of the sport. So go out there, have a excellent time, and make certain you have your protective gear on ahead of engaging in play.

Jeffry Evans, understands that you are searching for high top quality, low-cost airsoft guns, and has the tools and expertise to assist you succeed in .


Post from articlesbase.com

paintball pistol , ,